FEATURES

Blockpost-Strelka is an ideal mobile solution that is used to measure all the relevant parameters in one drive-through.

The system operates in automatic mode. It can be used both as a WIM system (up to 20 km/h) and a static scale. Two-step measurement of vehicle parameters helps to avoid errors and increase the measurement accuracy. The system can be installed in several minutes at any site. The system can be removed and deployed in any placeВозможность смены места дислокации. It can be remotely connected to a fixed WIM system.

Image

Vehicle type identification

Rapid deployment

Vehicle classification (EUR-13, RUS-12)

Online commutation with fixed WIM systems

Recognition of LPs all over the world

ХАРАКТЕРИСТИКИ КОМПЛЕКСА

Image

Автоматическое формирование пакета данных по каждому ТС

Automatic generation of a data package for each vehicle (vehicle record) and its transmittance to the processing center or a portable drive, and printing out the violation ticket. Two modes of violation registration

Измерение нагрузки на одиночную ось и нагрузки на ось в группе осей ТС

Measurement of the total vehicle weight and axle group load with ±2% error in WIM mode, and ±0,5% in static mode

Измерение межосевых расстояний ТС с погрешностью ±20 мм

Measurement of axle spacing with ±20 mm error

Модульная структура комплекса позволяет конфигурировать комплектацию под решаемые задачи.

The system modular structure allows for configuring according to the tasks to be solved. The system can be assembled based on Ford Transit or similar vehicle, or can be supplied as separate modules

Измерение полной (общей) массы и нагрузки на группу осей ТС

Measurement of a single axle load and group axle loads with ±2% error in WIM mode, and ±1% in static mode

Определение скатности, количества осей и колес на оси ТС.

Detection of a number of axles and wheels

Технические характеристики

Range of measuring total vehicle weight and axle group load, kg (N – number of axles) от N×200 до N×30 000
Allowed relative error when measuring the total vehicle weight and axle group load,%
- Dynamic operation ± 2
- Static operation ± 0,5
Allowed relative error when measuring the axle group load, %
- Dynamic operation  ± 2
- Static operation ± 0,5
Range of measuring axle load dynamically and statically, kg 200 to 30 000
Allowed relative error when measuring the axle load, %
- Dynamic operation ± 2
- Static operation ± 1
Allowed relative error when measuring the axle load in an axle group, %  
- Dynamic operation ± 4
- Static operation ± 2
Allowed absolute error when measuring axle spacing, mm ± 20
Operating speed measurement range, km/h 1 to 20
Operating temperature range, °С -40 to 40
AC parameters
- Voltage, V 187 to 242 
- Frequency, Hz 50 ±1
Continuous operation time Unlimited
Weighing platform dimensions, mm
- A type 780х380х43
- B type 900х500х39
Weighing platform weight, kg 32